Self-Level Floor Leveller
SELF-LEVEL is a protein free cement-based, sub-floor smoothing underlayment that has been formulated to provide a consistently level finish. Apply to solid sub-floors prior to laying ceramic or decorative floor coverings, which will provide a consistently level screed from a 2mm up to 12mm thick. SELF-LEVEL incorporates specially blended cements, finely grade sands and organic super-plasticisers, which with the addition of correctly gauged water gives the ideal properties for application to masonry-based floor surfaces such as tamped or worn concrete and sand/cement floor screeds. On non-porous floors such as mastic asphalt, plywood, dense concrete, existing tiles and painted or sealed surfaces, SELF-LEVEL powder should be mixed with SELF-LEVEL latex to offer improved adhesion to the substrate and allows the product to be used on floors where under-tile heating is to be specified.
- High Flow fast levelling to a super smooth finish.
- Takes foot traffic after 4 hours & tiling after 8 hours.
- Levels from 2mm up to 12mm in a single application.
- Can be mixed with water or Palace Self Level Latex.
- Use Floor Screed latex for heated sub-floors.
- Protein & ammonia free low odour formulation
SLC 1550 Flex
Professional SLC 1550 FLEX is a single pack, fast-drying, universal renovation screed with fiberflex microfibre technology.
It is manufactured from a controlled blend of special sands, cements and synthetic polymers to give a high quality flooring product which is self-levelling and smoothing. For use in fast track domestic and commercial situations, such as, where levelling of up to 50mm is required or for use over underfloor heating and on more difficult substrates, e.g. timber. It does not provide a wearing finish but provides an ideal surface to receive resilient floor finishes including: carpet, natural stone, ceramic tiles, vinyl, resin coatings, etc. It is ideal for offices, dwellings, schools, hospitals, airports, etc.
- Single pack
- Self-levelling
- 3-50 mm in one application
- Fast drying
- Protein-free
- FiberflexTM Technology
- Foot traffic in 2-4 hours
- BS EN 13813 CT–C25–F7
- Suitable for underfloor heating installations
Packaging:
20 kg (or 25 kg) multi-wall paper sacks
Coverage:
20 kg will cover approximately 3 m2 @ 5 mm
SLC 3015 Fast
Professional SLC3015 Fast is a single pack, ultra-rapid setting, fibre-reinforced, underlayment. It is manufactured using Larsen’s proprietary cement technology, with a controlled blend of special sands and synthetic polymers to give a high quality flooring product which is self-levelling and smoothing.
- Ultra Rapid Drying
- Single Pack
- Up to 15mm
- Fibre Reinforced
- Foot Traffic in 30min
- Cover in 1 hr
Packaging:
20kg bag